Smart home indoor wiring and positioning

1 wiring method

(1) Roof wiring. This type of wiring is mainly used on items, and is most conducive to the protection of wires. It is the most convenient way of construction. Wire tubes are mainly concealed in decorative surface materials or ceilings. They do not have to bear pressure, do not need to be grooved, and the wiring speed is very good. One of the wiring.

(2) Wall wiring. This kind of wiring mainly takes the wall. The advantage is that the wire tube itself does not need to bear weight, and its bearing is on the cement behind the pipe.

(3) Ground wiring. This type of wiring is mainly grounded. The disadvantage is that it is necessary to use a better wire harness because the wire harness on the ground will bear the weight of the human body as well as the furniture (the cement on the surface of the pipe does not fully load, because it is completely an arch bridge. In the form of a tube, the tube is actually one with cement, so it must bear a certain amount of weight.

2. Positioning

(1) Accurate, comprehensive, and one-time.

(2) The orientation of the kitchen line should be fully referenced to the cabinet pattern. The positioning of the integral bathroom should be completed with the bathroom equipment.

(3) TV sockets and related positioning should take into account the height of the TV cabinet and the type of all TVs owned by the owner.

(4) There are more light bulbs in the living room lanterns, and the owners should be asked whether to adopt group control.

(5) When positioning the air conditioner, it should be considered whether it is single-phase or three-phase.

(6) When positioning the water heater, be sure to specify the specific type used.