The automatic transformation of machine tools mainly uses industrial robots to change the loading and unloading mode of workpieces in the machining process, replace robots and special machines with robots , complete workpiece loading and unloading, work reversal, process conversion, and realize the processing of mechanical parts without people or less people. Units and production lines enable 24-hour high volume, automated processing.
First, the design principle of the automatic transformation system of the machine loading and unloading robot:
Because the renovation project is carried out under the existing conditions of the factory floor, compared with the new project, it will be subject to many objective conditions. Therefore, the project system design must be:
1, personalized. In line with the actual situation of the factory, it can fully meet the needs of automated production and solve key problems.
2. Economical. Focusing on the cost performance of the project, under the premise of meeting the requirements of automated production, because it is simple, not seeking luxury, try to spend less, and save the cost of renovation.
3. Maximize. With the same cost of retrofitting, you can do your best to increase the level of automation and automation, and use less or no labor to increase production.
Second, the flexible solution of the machine tool automation transformation project:
Because retrofit projects are carried out under existing conditions, key issues must be addressed flexibly:
1. Industrial robots are selected. According to the effective height of the workshop, the production cycle is gantry (truss type) or joint type robot.
2. Layout of robots and machine tools: Machine tools and robots on the automation of processing units and production lines, according to the floor area of ​​the workshop, under the premise of facilitating the improvement of production tempo, respectively adopt L-shaped, ring-shaped, "product" words, "one "Word layout.
3. Production and renovation. The installation and commissioning of the loading and unloading robot is separated from the machine tool, so that the production and transformation are correct.
Frequency inverters for 3-phase asynchronous motors from 0.75 to 800 kW, variable torque applications
Transformer And Frequency Converter,3 Phase Inverter Air Conditioner,Inverter Vs Generator,Voltage And Frequency Converter
Wuxi Trenty Machinery & Equipment Co., Ltd. , https://www.elec-inverter.com