Friends bought millet 5 mobile phone
Millet 5 supports Qualcomm's QC3.0 fast charging technology
Then a friend started a mobile power supply that supports QC3.0 fast charging technology, and then every time he went on a business trip, he always felt that a charging head was not enough.
Ordinary 5V charging is too slow, always want to buy a dual QC3.0 charging head
As a plus three of me, VOOC Flash Charger is not open source, let alone buy a mobile power to support VOOC flash charge, and say more are tears
Second, CRDC dual qc3.0 quick charger out of the box
After receiving a large paper box, it was heavy...
The big box removed a small paper box, and the small paper box was also plastic. It looked very good. The upper left corner is the CRDC smart logo, the upper right corner is the logo of Qualcomm QC3.0, and the lower left corner is the Chinese label. All packaging is English in addition to this label. It feels that CRDC's market is not confined to the country.
Model number is PA-T16, AC wide input 100-240V, 50/60Hz, nominal each port 3.6V-6.5V, 3A, 6.5V-9V, 2A, 9V-12V, 1.5A, total power 39W, with 3C Certified
On the back is to pursue green life together with CRDC smart
The bottom is the introduction of Qualcomm's fast charging technology... It's all in English. Look on the line.
Many certifications, the Chinese market, the mainstream certification in Europe and the United States have
Open the small box, you can see the white manual, blue warranty card and certificate
The following also sent a data cable
Lined up, charger, charging cable, manual, certificate, warranty card
Charging cable, USB plug with CRDC smart logo on the front
On the back is a simple USB logo
CRDC smart logo also available at micro USB connector
Charger black, plastic material, frosted surface treatment, CRDC smart logo printed in the middle, three-dimensional size is 646,328, very fat, weight 116g, as a charger, this weight is not light ... No wonder when you get express Very heavy
The parameters of the charger are printed on the USB socket, the QC logo of Qualcomm is in the middle, and the two output ports are marked with output 1 and output 2
Both ports support QC3.0, marked with an orange color
AC plug, can not be stored, can not be folded, when carrying is still more inconvenient than can be folded
The output port 1 and the output port 2 are slightly upwardly inclined, and obviously feel a bit slanted after being inserted. Although the insertion and removal are not affected, the viewing is still uncomfortable. Consulted, said that it may be deliberately designed to facilitate the force, including USB socket shrapnel and inserted into the USB socket and circuit board force
Fourth, CRDC dual qc3.0 fast charger test (theory of output & combat identification)
Output 1 of 5V, 9V, 12V no-load voltage, are very good, not too high nor too low
Output port 5 of 5V, 9V, 12V no-load voltage, a little worse than the output port 1, it can still be a little lower 9V and 12V
Output voltage of 5V, 9V, 12V of output port 1 uses EBD-USB+ test, when testing 12V output capacity, test tool is loaded with 35W.
Theoretical Output Capability of ESD-USB+ Test for 5V, 9V, 12V at Output 2
I made a form for easy viewing, the single port should be able to reach 45W, when the dual port full load test, the total output exceeds 50W, about 24W single port, is the appearance of 12V output 2.2A
Output ports 1 and 2 charge the ipad air2, perfectly identify Apple devices, 2.4A full load, current above 2.3A
Charge one plus three, about 1.5A for a year without change
Charging anker's QC2.0 mobile power supply, triggering 9V fast charge, current around 1.7A
Perfect handshake QC3.0 millet 5, about 15W power
Summary, normal charging, handshaking QC2.0 and QC3.0 no problem, Apple devices can correctly identify, to ipad air2 to 2.4A full speed charge
V. Summary
1. Dual port support QC3.0 charger, the theoretical output is very strong, reaching more than 50W, dual port full load case, single port also has more than 24W of power
2, can be seen through the size and weight measurements, this is a small, not light weight charger, perhaps this is an advantage, you can guarantee heat and materials, but inevitably in the use of the plug will occupy other With electric appliances, the full-load charging temperature is not low for a long time
3. Excellent recognition, no problem with handshaking QC2.0 and QC3.0, Apple devices can also recognize, and normal use can almost do a charger to meet the charging requirements of all devices
4, the disadvantage is plastic matte shell joints are not too delicate, very rough, USB socket is oblique (although not Virgo, is not very obvious, but still can not accept, but fortunately not for me), AC socket can not be folded Storage, small size, light weight
5, have to say, is a very good charger, in addition to some minor drawbacks
thank you all!
END
2500 Puffs Electronic Cigarette
ALD GROUP LIMITED , https://www.aldvapor.com