The main difficulties of naked-eye 3D technology

On July 19, 2011, on July 14, 2011, Toshiba Corporation of Japan officially released the F750 notebook computer with naked-eye 3D function. The birth of this product not only caused huge waves in the notebook computer industry, but also a milestone node for the entire consumer electronics industry. With the release of this naked-eye 3D notebook computer, electronic products with naked-eye 3D function have penetrated into almost all consumer electronics fields, and are no longer limited to the previous limited fields such as game consoles and DC / DV.

Toshiba ’s 12-inch and 20-inch naked-eye 3D TV commercial renderings in Japan
Toshiba's 12-inch and 20-inch naked-eye 3D TV commercial renderings launched in Japan

In fact, since the beginning of this year, officially commercialized naked-eye 3D TVs have appeared on the Japanese home appliance market. These are the two small-sized naked-eye 3D TVs launched by Toshiba (12-inch and 20-inch, respectively). However, the size of these two products is really small, so it is difficult to count as a real mainstream product. After their introduction, there is no special sensational effect between the color TV industry and consumers.

So for ordinary consumers with more practical 32-inch flat-screen TVs, what are the difficulties that hinder the popularization of naked-eye 3D technology? What is the current development situation of naked eye 3D technology? Should I consider the factors of upgrading to "naked eye 3D" in the future when buying a TV? This article will give you the answer.

Glasses-free 3D technology also has "internal competition"

"Naked eye 3D" is just a functional description vocabulary. If you subdivide it further, naked-eye 3D technology can also be divided into several completely different types. Different naked eye 3D technology principles are different, and the final imaging effect is also different. It can be said that the naked-eye 3D technology itself is still in the process of development and transformation, and has not reached a particularly perfect level.

At present, there are two common and relatively mature naked eye 3D technologies, one is the parallax barrier (Barrier) type, and the other is the lenticular lens (LenTIcular Lens) type. Among them, devices with a smaller display area mostly choose the former technology, while larger devices such as TV sets and monitors prefer the latter technology.

Fingerprint Lock Motor introduction:

Basic security work, lock body responsible for the security door lock body responsible for opening and closing lock, the lock body  Lock Motor  is of crucial importance.


Functions: it is widely used in various intelligent locks, such as Shared bicycle lock, fingerprint lock, glass lock, safe lock, hotel lock, family lock, inductive smart lock, etc


Features:Fingerprint Lock Motoris based on micro precision reducer development, small intelligent micro precision reducer can do 10 mm in diameter, is widely used in safe, locks, smart locks, sensor intelligent lock;

This kind of motor has the characteristics of low noise, low energy consumption, small volume, light quality, high precision, large torque and durability

Method of use: the best stable in horizontal plane, installed on the Fingerprint Lock Motoroutput shaft parts, cannot use a hammer to knock, knock prone to press into the dc Fingerprint Lock Motor  drive, may cause damage to internal components, and cannot be used in the case of blocked.

Lock motor

Operating temperature range:

 lock motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at  ordinary room temperature catalog specifications re based on use at ordinary room temperature  (approximately20~25℃.

If a  lock motor  is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.


Storage temperature range:

Fingerprint Lock Motor should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.


Service life:

The longevity of Fingerprint Lock Motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.



●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.


when it come to volume production,we're a major player as well .each month,we rurn out  600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you

Looking forward to your inquiry. Welcome to our factory.

Lock motor

Fingerprint Lock Motor

Fingerprint Lock Motor,Motor For Fingerprint Lock,Gear Motor For Fingerprint Lock,Dc Motor For Fingerprint Lock

Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com

Posted on