At present, the LED lighting industry has entered the “golden period†of rapid growth. The LED driver power industry, which is a key component of LED lighting, is also welcoming the best time for development. In particular, with the recent introduction of relevant policies by local governments to accelerate the transformation of LED public lighting, the market demand for outdoor LED driver power has increased significantly, and this has undoubtedly put forward higher requirements for the supply capacity of LED Power Supply manufacturers.
In this environment, outdoor "standardized" LED power solutions have gradually become the target of many domestic LED drive power manufacturers competing.
“In the past, most of the sales models of outdoor LED drive power companies were mainly project-driven, with more customized services. For example, after receiving the government order, the LED street lamp factory may only have 30 days left after winning the bid, but stay For Power Supply manufacturers, there may be only about 15 days left, and the delivery time is more urgent. The most complicated thing in LED lamps is the power supply, the lamp beads and the casing can be purchased, but the LED power supply needs more than 200 raw materials, and it takes dozens of processes and Two to three days of production, the LED power supply manufacturers have higher requirements. With project-driven operation, LED power supply manufacturers will become more and more difficult to do. To solve this problem, Shilong Fuhua has introduced the sixth generation of standardized outdoor LED power supply, transforming the previous customized service into standard product manufacturing. The advantages of standardized power supply products are very obvious, the delivery time is very short, seven days delivery, and five years warranty. "We introduced the sixth generation of standardized outdoor LED power supply combination. Market research and industry development trends can basically cover 80% of the application products in the market. From the early stage of the project, the government can request 15 days to install the lights. â€
Infineon Electronics, Moso Power (002660.SZ) and Zhongheng Paiwei and other domestic LED power manufacturers are also actively developing and marketing in the outdoor LED standard power supply field. Since 2013, Infineon has launched a series of standardized outdoor LED driver power products that can be regulated, but we are promoting in overseas markets earlier than the domestic market, mainly for medium and high power LED products. Although several LED power supply factories in China are gradually introducing outdoor standardized LED power supply solutions, the standardized LED drive power products must be matched with the downstream customers' design schemes. If the matching between the two parties is not enough, the power supply factory may Still need to take some detours.
In the field of indoor LED lighting, a small number of LED power supply manufacturers including Fuhua Electronics and Infineon are also trying to introduce related standardized LED power solutions. "In terms of indoor LED power supply, we have cooperated with NVC Lighting, Philips, Osram and Dehao Runda to provide customized services, and at the same time, we will introduce some standardized indoor power supply with reference to the products supplied to them. Product.†Li Tao said that indoor standardized power supply may only meet the market demand of 10% of the market segment, because some international high-end customers prefer to have personalized products, so the standardization of indoor LED drive power still needs to be done first. Market research. However, the R&D director of a LED power plant in East China has different views on the concept of “standardized LED power supplyâ€. “At present, the standards of the entire LED industry have not yet come out. The standardization of the LED power industry may still need a long way to go. The so-called standardized products introduced by some power supply manufacturers are not based on current, size and safety standards. They may be only recommended by LED power supply manufacturers for downstream equipment manufacturers in order to prepare inventory and shorten lead times. product."
Undoubtedly, standardized products are an inevitable trend for any processing and manufacturing industry to mature. Especially for the large-scale LED driver power supply enterprises, with the gradual increase of the LED lighting market in the future, scale, brand and sustained and fast supply capacity will become the key to the future LED power supply manufacturers to win the market, and standardized products. After being designed and produced by the power supply manufacturer, it is recommended for use by LED lighting manufacturers. Once its scale is popularized, LED power supply manufacturers will become more active in the market, and their market share and product competitiveness will be greatly enhanced. Upgrade.
In this environment, outdoor "standardized" LED power solutions have gradually become the target of many domestic LED drive power manufacturers competing.
“In the past, most of the sales models of outdoor LED drive power companies were mainly project-driven, with more customized services. For example, after receiving the government order, the LED street lamp factory may only have 30 days left after winning the bid, but stay For Power Supply manufacturers, there may be only about 15 days left, and the delivery time is more urgent. The most complicated thing in LED lamps is the power supply, the lamp beads and the casing can be purchased, but the LED power supply needs more than 200 raw materials, and it takes dozens of processes and Two to three days of production, the LED power supply manufacturers have higher requirements. With project-driven operation, LED power supply manufacturers will become more and more difficult to do. To solve this problem, Shilong Fuhua has introduced the sixth generation of standardized outdoor LED power supply, transforming the previous customized service into standard product manufacturing. The advantages of standardized power supply products are very obvious, the delivery time is very short, seven days delivery, and five years warranty. "We introduced the sixth generation of standardized outdoor LED power supply combination. Market research and industry development trends can basically cover 80% of the application products in the market. From the early stage of the project, the government can request 15 days to install the lights. â€
Infineon Electronics, Moso Power (002660.SZ) and Zhongheng Paiwei and other domestic LED power manufacturers are also actively developing and marketing in the outdoor LED standard power supply field. Since 2013, Infineon has launched a series of standardized outdoor LED driver power products that can be regulated, but we are promoting in overseas markets earlier than the domestic market, mainly for medium and high power LED products. Although several LED power supply factories in China are gradually introducing outdoor standardized LED power supply solutions, the standardized LED drive power products must be matched with the downstream customers' design schemes. If the matching between the two parties is not enough, the power supply factory may Still need to take some detours.
In the field of indoor LED lighting, a small number of LED power supply manufacturers including Fuhua Electronics and Infineon are also trying to introduce related standardized LED power solutions. "In terms of indoor LED power supply, we have cooperated with NVC Lighting, Philips, Osram and Dehao Runda to provide customized services, and at the same time, we will introduce some standardized indoor power supply with reference to the products supplied to them. Product.†Li Tao said that indoor standardized power supply may only meet the market demand of 10% of the market segment, because some international high-end customers prefer to have personalized products, so the standardization of indoor LED drive power still needs to be done first. Market research. However, the R&D director of a LED power plant in East China has different views on the concept of “standardized LED power supplyâ€. “At present, the standards of the entire LED industry have not yet come out. The standardization of the LED power industry may still need a long way to go. The so-called standardized products introduced by some power supply manufacturers are not based on current, size and safety standards. They may be only recommended by LED power supply manufacturers for downstream equipment manufacturers in order to prepare inventory and shorten lead times. product."
Undoubtedly, standardized products are an inevitable trend for any processing and manufacturing industry to mature. Especially for the large-scale LED driver power supply enterprises, with the gradual increase of the LED lighting market in the future, scale, brand and sustained and fast supply capacity will become the key to the future LED power supply manufacturers to win the market, and standardized products. After being designed and produced by the power supply manufacturer, it is recommended for use by LED lighting manufacturers. Once its scale is popularized, LED power supply manufacturers will become more active in the market, and their market share and product competitiveness will be greatly enhanced. Upgrade.
USB Wall Charger is 1-port to 4-port USB Charger with EU plug, US plug, UK plug and AUS plug for choose. Yidashun offer multiple usb Wall Charger, usb type c wall charger, qualcomm quick charger 3.0 and qualcomm quick 2.0 charger, which can charge your mobile phone and tablets fast. And they are very small and light, which is easy to take for travel use.
USB Wall Charger
USB Wall Charger,Iphone USB Wall Charger,Portable USB Wall Charger,Micro USB Wall Charger
Shenzhen Yidashun Technology Co., Ltd. , https://www.ydsadapter.com