If you buy a new millet TV, if the remote control is not easy to use, you can't call it every day. The TV that cost a lot to buy but lost on a small remote control? Today Xiaobian teaches everyone a trick to get rid of the remote control and it is always a sudden failure or always prompting the problem of low battery.
1, in the case of ensuring that the remote control battery is fully charged. Please check the battery compartment of the remote control.
2. If, as shown in the figure, the positive contact of the remote control is a flexible metal wire, the area of ​​contact with the battery is too small and unstable. Causes the battery to be in loose contact with the remote control and cannot supply power normally.
3. When the battery is installed, the positive electrode of the battery cannot be tightly attached to the back cover after the back cover is closed. During use, the battery shake causes poor contact.
4, if the above problem occurs, then just as shown in the figure, in the battery positive pad a thick piece of paper or add a sponge and the like, you can perfect solution.
With a constant current of IC, the working voltage of the IC is 12-24V. As long as the voltage is not lower than the rated voltage, the current of each led beacon will be consistent.It is made of high-brightness LED (LED is made of imported chip---high brightness, good electrical).
No pressure drop can be achieved over a specific length and voltage.Suitable for urban lighting projects,home decoration, bars, dance halls, cars, indoor/outdoor advertising and interior and exterior contours of various high-end venues
Constant Current LED Strip,5050 RGB LED Strip,Constant Current LED Strip Flexible,Bright Constant Current LED Strip
SHEN ZHEN SEL LIGHTING CO.,LTD , https://www.sel-lighting.com