At the Taipei Computer Show in June last year, Cooler Master brought 2 concept radiators to the players. Attracted many eyeballs.
One called "MasterAir Maker 3DLV", the volume is large, including two large heat sinks, three 120mm fans, and four square closed heat pipes. It looks like it will inevitably affect the installation of memory. This cooling has not seen commercial products.
Another style of radiator. Is the predecessor of today's protagonist - "Heat Column Concept". After brewing for up to 7 months, it finally appeared on Jingdong~~~~
Out of the box
We can clearly see from the box that the Cooler Master U100M has a big change compared to the Heat Column Concept fan seven months ago. From the matt black fan to the current RGB. In the lower right corner, you can see the RGB certifications of several companies.
The 2 sides of the box are some of the characteristics and parameters of the radiator.
RGB fan and fully enclosed heat pipe. The so-called fully enclosed heat pipe is the heat pipe completely wrapped by the fins. Heat pipes are not visible from the outside. This design shares the same design as the heat sink that comes with the AMD Ryzen R7 1700. It is said that a cooling is cool and OEM.
Then there are some parameters. Fan speed (RPM) 600~2400 RPM (PWM) ± 10%. Air volume 22.63CFM ± 10%
The fan size is 100*100*25mm. The maximum diameter of this radiator is still quite large, with 145mm.
The back of the box has emphasized the importance of this heat sink in multiple languages.
The height of 74.5mm is more suitable for SFF and HTPC.
Drying
The oil is mixed with sugar cane and the box is filled with a single black shock-proof foam. Radiator is protected well. Take it out carefully and see no fin deformation.
Truthfully speaking, the shape of this radiator is a bit like a shiitake mushroom. .
It is worthwhile to realize that the Cooler Master U100M is higher than the concept of “Heat Column Conceptâ€. Interested students can look back at the second picture of this article. The cylindrical shape of the fins should be the heightened part.
On the one hand, the area of ​​the fins may be increased and the heat dissipation may be increased. More importantly, on the other hand, the height of the fan section is raised to avoid affecting the memory installation.
Invert the radiator to see this "hot column."
The radiator base is a brushed design. From this side you can see the connection of the radiator and fan.
It is easy to separate the fan and heat sink simply by picking with a needle. This will often clean the radiator. Come 2 close-ups.
Cooler Master The UFO G100M is equipped with two interfaces for RGB lighting effects to meet different RGB requirements.
Other Accessories
Meet the needs of the entire platform to install the mold.
Silicon grease, lighting controller, dimmer controller supply line and RGB pins.
Warranty instructions and installation drawings.
installation
In this way, the radiator is still quite large. Even ATX motherboards can block 1/3 of the area.
The installation of this radiator is quite simple. If the memory is too high, conflicts may occur.
For example, I use the Ten Commander Nighthawk. There are two high wings in memory. I must install the memory first and then install the heat to be able to install in the 2 and 4 positions. Therefore, if it is replaced with a ruler or avenger of a pirate ship, it may not be able to install memory on the 1st or 2nd place, and there will be cases where it is impossible to form a dual channel. Therefore, everyone buys memory when they do their homework.
on board
Application and testing
Cooler Master The UFO G100M is compatible with many RGB softwares. You only need to connect the 4-pin RGB interface on the motherboard to adjust the lighting effect according to your needs.
Push the AMD Ryzen R7 1700 up to 3.8G. About 2 hours or so of running a chicken game, the temperature performance of a radiator with a 10 cm fan is still good.
Continuous operation 6 times CINEBENCH R15 temperature up to 67°C. After the stop of operation, the temperature dropped quickly.
to sum up
advantage· The appearance is novel and unique. RGB lighting effect
· Fan heat effect is expected as an HTPC heatsink.
ShortcomingsNot compatible with all memory.
· Noise can be heard when running at full speed.
Crab Crab ('ω') و Your Reading ~~~~~
Shenzhen Xcool Vapor Technology Co.,Ltd , https://www.szxcoolvape.com