Are you looking forward to developing wearable devices like watches, oximeters or blood pressure monitors? The small size and advanced features required for smart watches present two basic challenges for system designers: How do you fit everything you need into a defined package? How do you power your device?
There are three solutions for ultra-low power operation in wearable electronics:
1. Run as much as possible in standby mode
The key to achieving long battery life is to minimize current consumption during operation by reducing unnecessary system activity. This means that in addition to turning off certain functions, it also runs in the sleep or standby mode of the microcontroller and the power save mode of the power supply. For example, when the user does not look at his (or her) watch, the display of the watch is turned off. Or when the SimpleLinkTM Bluetooth® Low Energy CC2541 Wireless Microcontroller (MCU) can run only through the sleep timer instead of Timer 1, the supply current is reduced from approximately 90μA to only 0.6μA – a power saving of over 99%! In addition, any background tasks must be driven by interrupts within the code. This way, the microcontroller can run in sleep mode as much as possible, only when it interrupts the command.
2. Minimize current consumption in standby mode
A key technology driver is to reduce the current drawn in these standby modes. For example, the MSP430F59xx (FRAM) microcontroller with EnergyTrace++TM technology consumes only 450nA in standby mode, thanks to its extremely low leakage FRAM memory. If you use the TPS82740A to power the microcontroller, the current drawn from a single-cell Li-Ion battery is only about 750nA, even if the microcontroller is slightly leaking when you supply power. In this case, the 360nA quiescent current (IQ) and the DCS-Control topology combine to achieve such low standby power consumption. If your current consumption is really low, you must have a load switch to disconnect the subsystems that are turned off (depending on their supply voltage) to prevent them from leaking current from the system.
3. Integrate to save valuable printed circuit board (PCB) space
Since you have reduced power consumption to a reasonable level, the battery does not need to be recharged every day. The second problem is the space problem - where do you plan to put all the devices (microcontrollers, sensors, power supplies, batteries, etc.)? For this challenge, the integration method can help you a lot. The TPS82740A is a MicroSIP device that integrates all the necessary passive components and a load switch! This is less than 75% smaller than the discrete TPS62740 type implementation with the same ultra low power performance (optimized). In addition, the MSP430F59xx integrates features such as temperature sensor functionality, differential input analog-to-digital converter capability, 8-to-1 multiplexer LCD display driver capability, and 256-bit encryption. Just add a battery and some other system-specific sensors, and you're basically done!
Run in standby mode, minimize current consumption in standby mode, and integrate to save board space – these three methods will make your next wearable design a success. What other methods can save power in a wearable design?
Industrial Low High Bay Lighting Led Driver
Constant Current LED driver, Ul Dimmable Transformer, With global manufacturing standards and various certifications including CE, UL and FCC, our lighting products are sold in domestic market and are exported to various international markets including US, UK, France, Germany, Australia, Africa, Korea etc. We offer a wide range of Led Lighting Solutions which includes LED Linear Lighting or System, , LED Lams, LED High bay lights etc. Maximize beauty of your workplace with our beautiful Warehouse Lighting, Warehouse Lights Driver, Workshop Lighting, Supermarket Lighting and Factory lighting solutions.
Application: Specifically for high bay light, High Power Led Driver above 100W,normal for outdoor for waterproof, AC100-277V, 0-10V/PWM/RX dimming,short circuit protection,class 2 satety output design, passed the UL/FCC/TUV/RCM/CB/CE Certified. Europe and North America market.
Parameter:
Input voltage: 100-277vac
output voltage: 25-143vdc
current: 0.1A- 3.3A.
Power:108W
Power factor: >0.9
IP degree: IP65
Dimming:0-10V / PWM / RX / DALI.
>=50000hours, 5 years warranty.
certificate: UL CE FCC TUV SAA ect.
FAQ:
Question 1:Are you a factory or a trading company?
Answer: We are a factory.
Question 2: Payment term?
Answer: 30% TT deposit + 70% TT before shipment,50% TT deposit + 50% LC balance, Flexible payment
can be negotiated.
Question 3: What's the main business of Fahold?
Answer: Fahold focused on LED controllers and dimmers from 2010. We have 28 engineers who dedicated themselves to researching and developing LED controlling and dimming system.
Question 4: What Fahold will do if we have problems after receiving your products?
Answer: Our products have been strictly inspected before shipping. Once you receive the products you are not satisfied, please feel free to contact us in time, we will do our best to solve any of your problems with our good after-sale service.
Industrial Low High Bay Lighting Led Driver
Industrial High Bay Driver,Heat Resistant Ufo Led Driver,200W Led Driver, Round High Bay Driver;UFO,Constant Current
ShenZhen Fahold Electronic Limited , https://www.fahold.com