Steps:
Find the programming software startup program "PhoenixSuit.exe" and double-click to open it.
Click "One-click Brush"
Brush preparation is temporarily going here. Next is to connect one of the InfiK i6 data lines to the computer's USB port first.
Do not let go, in the power (must be connected to the USB port near the network port) 
Use another USB cable interface to connect to Infinico i6 set-top box USB specified interface (must be connected to the USB port near the network port). The computer will prompt you to find the new hardware in the lower right corner. The USB driver will be installed automatically. (If it fails to install properly, install the driver manually.) Right-click on My Computer (Computer) and select Manage.
Plug in the data cable, connect the set-top box, and notice the changes in the device manager after the key operation
Plug in the data cable, connect the set-top box, and pay attention to the changes in the device manager after the key operation. In general, when the computer recognizes the tablet computer, the installation driver interface will appear in the device manager, which can be referred to by some set-top box manufacturers. Manually select the installation driver as in the tutorial. If the interface does not appear, find the program with the exclamation mark in the interface above and right-click and select "update driver".
Brush tooltip Yes and No choice, click Yes
download link:
1. The firmware used is the link: http://pan.baidu.com/s/1mg1nRgk Password: sikb
2, Brush used by the tool - PhoenixSuit_V1.10 (other versions of the attempt failed)
Link: http://pan.baidu.com/s/1sjp8vGL Password: uaw9
Note: Download the firmware without decompressing it on the desktop. Tools need to be extracted to the desktop.
Our factory can make the aluminum beams, aluminum spools/Aluminium Bobbin,bonding Wire Spool ,Aluminium Reel,Warp Knitting Beam for kinds of machine
aluminium beam for narrow fabric machine/needle loom/webbing loom/tape loom
specifications: 21",30",40",42",500,800.1000,etc
Flange : Made of high strength aluminium alloy and manufactured by high pressure forging press.
Barrel : As an extruded pipe of heat-treated aluminium, it has high strength and precision has excellent rigidity and durability
For customer service, call 0086-13777009159(mobile) or 0086-574-26889982(telephone)
Aluminum Spool,Warp Knitting Beam,Aluminium Reel,Aluminium Bobbin
NINGBO BEILUN TIAOYUE MACHINE CO., LTD. , https://www.spool-manufacturer.com