LEDinside recently pointed out that with the simplification of design and the reduction of LED usage, the power and brightness of LEDs will also increase. By 2012, high-power LEDs are expected to be used in LCD TV backlight modules.
In the research report, LEDinside, a market research organization, predicts that the global LED-backlit LCD TV shipment penetration rate will reach 18% in 2010. In 2011, the LED-backlit LCD TV penetration rate is estimated to reach 43%, and in 2012 it will exceed 60%. At present, the LED backlight structure of the LCD TV is designed to be the mainstream of the light-emitting side of the upper and lower sides. It is expected that the left and right sides will be illuminated or the lower side will be mainly illuminated in 2011. With the simplified design and reduced LED usage, the LED Both power and brightness will also increase.
LEDinside said that in 2012, if there is a backlight design with only one side of the left side and one LED strip, the LED used at that time will be a high power LED. As far as the LCD TV project is concerned, currently in the LED backlight structure, it is mainly divided into a side light design and a direct design. According to LEDinside's forecast, the proportion of LED backlight modules with side-light design in 2010 is about 92%, and the proportion of direct-type design models is about 8%. However, by 2011, the proportion of the side-light design will be reduced to 90%, and the direct-down ratio will be increased to 10%; in 2012, the proportion of the side-light design is estimated to be 86%, and the direct-down ratio is estimated to be 14%. .
It is understood that in 2009, the LCD TV side-lit LED backlight design structure is based on 4 side illumination, a total of 6 LED strips, the LED specifications (each) used 0.4 watts, brightness less than 24 lumens. In 2010, it developed into a structure with four LED strips on the upper and lower sides. The LED power used was still 0.4 watts and the brightness was 24-30 lumens. In order to continuously reduce the backlight design, TV brands and system manufacturers, and panel manufacturers are still developing new backlight design structures. It is expected that by 2011, it will be developed to use two LED strips for illumination on the left and right sides, or a backlight design with only two LEDs. As the amount of LEDs is reduced, the LED power used is amplified to 0.6 watts and the brightness is increased to 56-62 lumens.
LEDinside expects that in 2012, the industry may have a backlight design that uses only one side of the light and only one LED strip. At that time, the LEDs used in the TV backlight module may be dominated by high-power LEDs. It is understood that the current high-power LED on the market, the power is at least more than 1 watt, and the brightness is more than 100 lumens.
Products Description
Led Grow Light is the newest trend for indoor growers. Advanced Led Grow Lights use less energy,and create less heat,not only provides intense, effective lighting for indoor gardening but also make the garden cool. Hydroponics,which is a method in high-tech horticulture where plants grow in soil-free nutrient baths,led hydroponic lamp is a perfect example of how science and technology can work together to develop solutions to human problems.
Advantages for led grow light
1. Bring You High Yield
The traditional grow lights, such as HID and HPS can just bring you 0.5 -0.8 gram per watt, no more than 1 gram. But the led Grow Light can bring you 1-2.5 gram per watt. It's amazing! LEDs in greenhouses deliver same yield as grow lights, using just 25% of the energy. So as for the energy conservation and environmental protection light source, the planters will consider the led grow light as their first choice.
2. Less Heat
While most grow lights are very warm, as HID, so you would need use the fan to solve this problem in summer. LED Grow Lights are generally moderate in temperature, and they will not harm a person if he touches them. As such, it is much safer and convenient for owners and their crops, they can be placed very close to the plants to deliver high intensity lights to the surface of the leaves.
3. Low Cost On Everything
Less electricity, save about 60% than HID.
Low amounts of heat, means less money spent on the room's costs of cooling.
Long life-span, no need to replace the bulbs.
No ballast.
No reflector.
Full Spectrum Led Plant Grow Light and High Value View
Item Display
Advantages
Plug with listed certificate safe to use.
Application
Fruit and Vegetables Growing
Flowers Growing
Special Crops Growing
Leaf and Seeding Growing
Our Quality Control systems and after-sales
Package
Why Choose us?
Cooperative Policy:
Providing production schedule photos to ensure you know every process.
Profrssional follow-up team, one-to-one service in time.
Shipment sample for checking before shipment.
Priority to get the our lastest product information after cooperation
Good after-sale service offered, please send us feedback if you have any questions
Low Risk Promise:
Sample 3pcs: Lead time 3 working days.
500pcs order: lead time 5~8working days
10000pcs order: Lead time 20~28working days
Warmly welcome to take a visit on our factory at any time and we can pick you up.
Vegetable Garden Led Grow Lights,Vegetable Garden Plant Grow Lights,High-Power Led Plant Light,High Power Led Grow Light
Shenzhen Phlizon Technology Co.,Ltd. , http://www.philizon.com